A cigar ring gauge device??

If the extra holes result in it being too flimsy the 60 could be eliminated...an assumption could be made that if it doesn't fit 58 then it is a 60. Isn't 60 the larges RG for production cigars except for a few unique smokes? In any event I'll buy a couple or more when they are available Richard. :tu
 
I will share the exacting specifications for the plastic when I hear back from the manufacturer. I am not even sure if the 3 holes over 52 RG will fly but I submitted the design to the manufacturer today and we shall see.

Unless something changes the smallest quantity would be 500 and due to the custom metal die and setup I am quoted around $3 per on the first 500, it drops off to around $2 at 1000. I need to work closely with the manufacturer to ensure we get lasting quality. This should be fun if we (I) are patient.:D

Thanks guys.
 
chippewastud79 said:
Looks pretty good, who is gonna make them? You contact Scott about those? :tu
Click to expand...

I contacted Scott early on (several times) and he indicated that his company wasn't setup to handle this product. He encouraged me to find my own manufacturer and after several tries I think I have a good one, they have been patient while I found the time to create the design, which may change a little if we can ID the font in the logotype "Club Stogie" at the top of the page on the left. Yeah, that one. :)


page_top_30_WBK.gif
 
I recently scored a similiar one on Ebay. Bitch screwed me out of my $9. Better be damn glad she isn't within a 1000 miles or I'd be making a road trip. And yes, I am the type that would spennd $200 in gas to get my $9 back. I hate thieves, my money doesn't grow on trees. Only other time on Ebay was for a PDA. She paid up when I mentioned that Pittsburgh was only an 8 hour ride away.... I really hate a thief!
 
I'd be into buying one of these.

I'm also interested in who you contacted to get one made. And I must say that it's too bad that the company that was making them before isn't doing so now. I think that they could come out ahead. :ss
 
ArnaudDMR said:
I'd be into buying one of these.

I'm also interested in who you contacted to get one made. And I must say that it's too bad that the company that was making them before isn't doing so now. I think that they could come out ahead. :ss
Click to expand...

Actually after many conversation with the original organization, Shumsky Humidor they finally offered to manufacture the item but where over priced and only one color. With the new manufacturer I was quoted 4 color-process printing.

vstrommark said:
I thought that someone was using something like this circle template

http://www.aoeartworld.com/index.asp?PageAction=VIEWPROD&ProdID=257

Do these work okay?
Click to expand...

Right you are vstomark, some of the lads use those, they work fine if you know the metric conversion, ie a 48 RG is the equivalent of 3/4" or 19.05mm

Since a single ring gauge unit equals 1/64th of an inch the metric equivalent would be .3968mm


I will keep everyone interested updated using the thread (courtesy of Craig) and when things are all set with the manufacturer we ill set up a official thread in the Group Buy section. :D
 
You must log in or register to reply here.
Back
Top